Installation guide

Touch-Tone
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
T P
76
HOW TO USE
Enable
NOTE: This feature is for rotary lines only.
If you have telephone lines that carry rotary signals, use the Touch-Tone Enable
feature to switch to Touch-Tone signals midway through a dialing sequence.
This lets you take advantage of bank-by-phone, credit card authorization,
computer access, and alternate long distance services.
When you hang up your handset after using this feature on a call, your system
returns to rotary signals.
None
To program a Touch-Tone Enable button for your voice terminal:
1 Label the button Touch-Tone Enable.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3
Touch the button you want to program.
4 Dial *76.
5 Slide the T/P switch to the
T P
Touch-
Tone Enbl.
center position.
To switch from rotary pulse to Touch-Tone signals as you dial a number:
1 Touch Speakerphone or lift your handset.
2 Dial the first part of the number.
3 Touch Touch-Tone Enable.
4 Dial the remaining numbers.
Speaker-
Touch-
phone
Tone Enbl.
no.
no.
5-158 MERLIN Plus System Features