Installation guide

Ring Override
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
T P
T P
Ring
Override
78
HOW TO USE
Sometimes you may want all of your calls to ring immediately, even if you have
programmed the lines on your voice terminal to ring after a delay or not at all.
(See “Ringing Options.”) For instance, you may need to cover calls for someone
who shares one of your lines. You can use a Ring Override button to temporarily
override the ringing option you have established.
None
None
A button with lights is recommended but not required.
To program a Ring Override button for your voice terminal:
1 Label the button Ring Override.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3
Touch the button you want to program.
4 Dial *78.
5 Slide the T/P switch to the center position.
To have all your calls ring immediately at your voice terminal:
1 Touch Ring Override.
If you have programmed this feature on a button with lights, the green light goes on.
Ring
Override
To return to your programmed line ringing:
1 Touch Ring Override again.
The green light goes off.
Ring
Override
5-126 MERLIN Plus System Features