Installation guide

3
4
5
6
Perform the appropriate procedure:
> Touch the appropriate Auto Intercom button(s) until the green light
beside it shows the paging group assignment you prefer.
Green light on
= voice terminal is assigned to the group
Green light off =
voice terminal is not assigned to the group
> If you do not have an Auto Intercom button for the voice terminal you
want to add or remove from the paging group, dial a code from the chart
below that corresponds with the voice terminal.
If the intercom
If the intercom
number is:
Dial this code:
number is:
Dial this code:
Intercom 10
#22 Intercom 20 #03
Intercom 11
#21
Intercom 21
#04
Intercom 12
#20
Intercom 22
#05
Intercom 13
#19 Intercom 23
#06
Intercom 14
#18
Intercom 24
#07
Intercom 15
#17
Intercom 25
#08
Intercom 16
#16
Intercom 26 #09
Intercom 17
#15
Intercom 27
#10
Intercom 18
#14
Intercom 28
#11
Intercom 19
#13
Intercom 29
#12
Touch Administer.
The console beeps twice.
Follow steps 2 through 4 for each paging group you want to administer.
Leave administration mode by sliding the T/P switch to
the center position.
T P
Administer
Susan 15
71 or 72
T P
Administer
If you want to clear all entries from group 1 or from group 2:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial *71 for group 1 or *72 for group 2.
3 Touch Drop.
MERLIN Plus System Features 5-75