Installation guide

Passwords
You and others in your business need at least one valid 5-digit password in order
to change a call forwarding number from a remote location. The first two
numbers in the password are the caller’s intercom number.
To create or invalidate a password, follow this procedure:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial *56
3 Perform the appropriate step below:
>
To create a password for a particular intercom number, dial a
MERLIN Plus system intercom number plus any three digits
except 000.
The console beeps twice.
>
To invalidate any password beginning with a particular intercom number,
dial the intercom number plus 000. Repeat the procedure for more
passwords.
The console beeps twice.
4
Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to the center position.
T P
T P
Administer
Administer
Icom no.
56
+ 123
Call Forward Destination Number
You can enter or change the telephone number where you want calls forwarded
(the CF destination number) in either of two ways:
●
Follow the first procedure below to enter or change the CF destination
telephone number from the administrator/attendant console with the system
in administration mode.
●
Follow the second procedure below to enter or change the CF destination
telephone number from a phone outside the system with the system
in CF mode.
5-36 MERLIN Plus System Features