Installation guide

3 Touch the line button.
The green light goes off.
4
Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to
T P
Administer
555-1234
50
T P
Administer
You may also choose to forward your calls without a message:
the center position.
1
2
3
4
5
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *30.
Dial 0 to turn off the message.
NOTE: To turn on the message, dial 1 instead of 0 in step 3.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
T P T P
Administer Administer
30 0 or 1
Numbers of Rings
To change the number of rings (the default is two rings) before the CF call is
answered:
1 Slide the T/P switch to P and touch Administer.
2 Dial *762 plus the number of rings (between 0 and 9) before CF
picks up the call.
NOTE: If the number of rings is set to 0, the voice terminal will not ring,
and the calls will be forwarded immediately.
3 Touch Administer.
The console beeps twice.
4
Leave administration mode
by sliding the T/P switch to
T P
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
Administer
Administer
the center position.
T P
7620-
7629
MERLIN Plus System Features
5-35