User`s guide

How to Program
How to Use
1 Label a button.
To place an intercom call to a Group Call
Distribution group:
2 Enter programming mode by sliding the T/P
1 Press Intercom-Voice or Intercom-Ring.
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
2 Lift your handset.
4 Dial *91 plus a Group Call Distribution code (870
3 Press the button for the group or dial the
through 875 or a code assigned through Flexible
appropriate rode.
Numbering).
4 When you hear a beep, begin speaking.
5 Program another feature, or leave programming
To transfer an outside call to a Group Call
mode by sliding the T/P switch to the center
Distribution group
position. (Digital phones: Dial #00.)
1 Press Transfer.
2 Press the button for the group or dial the
appropriate code.
3 Hang Up.
Group Page
DESCRIPTION
You can set up Group Page groups so that anyone in the system can use the
Group Page feature to page up to 10 people at a time directly through the phone
speakers. You do not need an external paging system for this feature.
CONSIDERATIONS
●
●
●
●
●
You can have up to six paging groups, each with a maximum of 10 phones.
If necessary, one phone can be assigned to more than one paging group. (All
phones in your system can be paged through the paging group 887. This
Page-All feature is automatically available and does not have to be
administered.)
You cannot page someone who has a Touch-Tone or digital phone.
If a person has activated the Voice Announcement Disable feature, that
phone cannot receive your Group Page announcement.
Group Page cannot be used over a tie line.
In systems with more than 11 extensions, Group Page-All (page group 887)
can be used if the system is pooled.
3-66 MERLIN II System Features