User`s guide

How to Administer
1
2
3
4
5
6
7
8
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press [More], [More], [Cntr Prg].
Press the Auto Intercom button for the phone to be programmed.
Press
[Enter].
If the display shows “System busy—please wait” try again later.
Perform the steps shown in the programming procedure for the
entering and leaving programming mode.
Press Conference to return to the main administration menu, or
mode by sliding the T/P switch to the center position.
If not, go to step 7.
feature, except for
leave administration
FIGURE 3-5 Button location codes for analog phones.
3-40 MERLIN II System Features