User`s guide

How to Administer
To
1
2
3
4
To
1
2
3
4
5
6
7
To
choose Behind Switch as the system type:
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press
[System], [Type], [More], [BehindSw].
You see the message “System is Re-starting,”and the administration menu reappears.
Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
assign host system codes to fixed feature buttons:
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press these buttons:
[More], [Options], [More], [BehindSw].
Press the appropriate button ([Transfer], [Drop], or [Confrnce]).
Dial the host system code for the fixed feature.
To assign a host system access code to the button, dial the appropriate code (up to 6
characters, including 0 through 9, *, #, Hold [pause], and Recall). If you don’t dial a
code, the button keeps the default feature, Recall.
Press
[Enter].
Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
configure lines see “Line Assignments in Behind-Switch Systems,” in this section.
MERLIN II System Features
3-23