User`s guide

How to Program
No programming necessary.
How to Use
To place calls on a basic telephone connected to a
Basic Telephone (012) Module:
● If you have a square system, dial 88 to access
an outside line. The system automatically
connects you to the first available line assigned
to your telephone.
● If your system type is Button Access to Line
Pools, dial 9 to access the main pool. You can
dial 88 to access another available line or line
pool, if one is assigned to your telephone.
● If your system type is Dial Access to Line
Pools, dial 9 and then dial the code for a
particular line pool.
You can dial 88 to access
an additional line or dedicated line pool, if one
is assigned to your telephone.
● If your system type is Automatic Route
Selection, dial 9 and then dial the outside
number. If the basic telephone is assigned an
individual line or line pool, you dial 88 to
access it.
For more information on using a basic telephone
connected to a Basic Telephone Module, see the
User’s Guide: Basic Touch-Tone and Rotary Telephones
for the MERLIN II Communications System
Release 3.
To place calls on a basic telephone connected to a
BTMI-2 or OPTI:
● To place a ringing intercom call, lift the
handset and dial the intercom number.
● To place a voice-announced intercom call, lift
the handset and dial #41, then the intercom
number.
● To access particular lines or line pools assigned
to buttons, lift the handset and dial the
appropriate codes shown in Figure 3-3.
(Dialing the code associated with the button
has the same effect as touching the button on a
MERLIN II system phone.)
3-20 MERLIN II System Features