User`s guide

TESTING THE PHONES
To test the lights and the ringing on your phone, or to verify that your phone
has been correctly installed, follow the appropriate procedure below:
How to Test a Phone
Analog phone:
1
2
Slide the Test/Program (T/P) switch on the
T.
The red and green lights next to your phone buttons
rings.
Slide the T/P switch to the center position.
left side of your phone to
flash alternately and the phone
NOTE: If your phone doesn’t respond to this test, check Section 4,
“Troubleshooting,” for assistance.
Digital phone:
1 Lift your handset and listen for a dial tone. (If this is a newly installed
system, it may take a moment for the system to recognize your phone
and provide a dial tone.)
2 Place a test call to another phone.
3 Go to another phone and place a test call to your phone.
NOTE: If either of these tests are unsuccessful, refer to Section 4,
“Troubleshooting” for assistance.
2-16 MERLIN II System Telephones