User`s guide

FIGURE 2-13 7406D and 7406D with Display phones.
7406D phone 7406D phone with Display
THE DISPLAY CONSOLE The MERLIN II system display console is the only telephone that can
administer MERLIN II System Release 3 features. It is often referred to as the
administrator’s console. See Figure 2-14.
The display has two lines to provide information about programming,
administration, and call status. When the display is not in use, it shows the
time, day, and date.
The station shift button allows you to select the group of stations that the
Auto Intercom buttons represent. Station Shift 1 represents intercom
numbers 10 through 49. Station Shift 2 represents intercom numbers 50
through 69 and 700 through 719. Station Shift 3 represents intercom numbers
720 through 759.
When you place a call from the console to an intercom number or transfer a
call, you touch the Station Shift button and the appropriate Auto Intercom
button located in one of the last four columns on the console. Whenever you
press a Shift button, the red light beside it goes on.
The console also has two Line Shift buttons for use in administration. With
Line Shift 1, the line buttons represent lines 1 through 30. With Line Shift 2,
the buttons represent lines 31 through 56.
For more information on the MERLIN II System Display Console, see
“Display” in Section 3, “Reference.”
MERLIN II System Telephones 2-11