User`s guide

Voice Announcement Enable/Disable
DESCRIPTION
Ordinarily, people can use the MERLIN II system intercom feature to
announce calls through
voice announcement to
Announcement Disable
instead.
your phone speaker.
However, if you do not want a
interrupt your work, you can use the Voice
feature to have intercom calls to your phone
ring
CONSIDERATIONS
● If you use the Voice Announcement Disable feature on a 10-Button
Hands-Free Answer on Intercom (HFAI) phone or on any phone with a
speakerphone, you deactivate the automatic answering feature.
● The Voice Announcement Disable feature does not affect phones with
separately connected Hands-Free Units.
● If you have a 7406D phone, you can place both ringing and announced
intercom calls, but you can receive only ringing intercom calls. Therefore,
you do not need to program the Voice Announcement Disable feature.
When someone from an analog phone tries to place a voice announced call
to a digital phone, it becomes a ringing intercom call instead.
● When you use the Voice Announcement Disable feature, you disable the
Group Page feature.
● Voice Announcement should be disabled for basic telephones.
How to Program How to Use
1 Enter programming mode by sliding the T/P
None
switch to P. (Digital phones: Dial #33.)
2 Press Intercom-Voice.
3 Dial one of the following codes:
➤ To allow voice announcements, dial *37.
The green light beside Intercom-Voice is on.
➤ To prevent voice announcements, dial *35.
The green light beside Intercom-Voice is off.
4 Leave programming mode by sliding the T/P
switch to the center position. (Digital phones:
Dial #00.)
3-142 MERLIN II System Features