User`s guide

How to Administer (Continued)
To enter the number of Inward Dial Plan digits:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [More], [TieLines], [More], [More], [More], [InDigt].
➤ Enter the number of digits, either 3 or 4 (default=4), for the inward dial plan.
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
To renumber the Dial Plan:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [TieLines], [More], [More], [More], [InDPln].
➤ To renumber the dial plan of one station, press [Single].
— Press [Station]
— Enter the old station number, then press [Enter].
— Enter the new station number, then press [Enter].
➤ To renumber the dial plan of a group (block) of stations, press [Block].
— Press [Station]
— Enter the first extension number
— Press
[Enter].
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
To print the Inward Dial Plan:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [Print], [More], [More], [More], [More], [InDpln].
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
MERLIN II System Features 3-135