User`s guide

How to Administer (Continued)
To select the Dialing mode:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [TieLines], [More], [InMode].
➤ Press line button to select the dialing mode:
— Green light on = Touch-Tone selected
— Green light off = rotary selected (default)
➤ Repeat step 3 for each tie line.
➤ Perform the step 3 procedure again, except select [OutMode] from the tie line menu instead of
[InMode].
➤ Repeat this procedure for each tie line port.
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
To select the Dial Tone:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [More], [TieLines], [More], [DialTone].
➤ Press line button to select the tie line dial tone:
— Green light on
= remote (default)
— Green light off = local
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
(Continued)
MERLIN II System Features 3-133