User`s guide

How to Administer
1
2
3
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press [System], [More].
4 Press [Renumbr].
You see a message showing that the system is restarting.
5 When the administration menu appears, go on to another procedure, or leave
administration mode by sliding the T/P switch to the center position.
System Size
DESCRIPTION
The MERLIN II system can be set for two different sizes: small and large.
The small setting is for systems administered for eight or fewer lines and 20 or
fewer phones. The large setting is for systems administered for more than
eight lines (up to 56) or more than 20 phones (up to 120).
Keep in mind that the system size you select doesn’t have to correspond to
the number of lines or stations your system has initially. If you expect your
business will require more lines and stations within a year or two, selecting
“large” makes it easier to administer the system when you expand it later.
CONSIDERATIONS If you change the system size designation
on a running system, the line and feature
attendant consoles.
from small to large, or vice versa,
assignments change on all
How to Administer
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [System], [Size].
4 Press [Small] or [Large] as appropriate for your system.
5 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
3-126 MERLIN II System Features