User`s guide

Special Characters in Programmed Dialing Sequences
DESCRIPTION You must enter special characters when you need to program a pause, stop,
or switchhook flash into an Outside Auto Dial, a Personal Speed Dial, or a
System Speed Dial sequence, and when you switch from rotary to Touch-
Tone signals in the middle of a programmed dialing sequence.
You can program a pause (1.5 seconds) into a dialing sequence. For example,
you may need to place a pause between a pool access code, such as a 9, and
an outside telephone number in an Outside Auto Dial sequence.
You can program a stop into a dialing sequence to allow you to wait for a
second dial tone. For example, you may need to program a stop between a
local telephone number and an alternate long distance authorization code.
You can program a switchhook flash at the beginning of a dialing sequence.
For example, you may need to program a button with a PBX, Centrex, or
Custom Calling feature code that calls for a switchhook flash.
You can program Touch-Tone Enable into a dialing sequence. For example,
you may need to include Touch-Tone Enable to use a credit card authorization
service.
How to Program
How to Use
In a behind-switch system, you enter host system To use Pause:
codes beginning with the pound sign ( # ) as
described in the documentation for the host
1 Dial the pool access code.
system. To use a MERLIN II system code 2 Press Hold (Pause).
beginning with the pound sign, you must
program a Speed Dial Access button. You press
3 Dial the outside telephone number.
that button instead of pressing #, then dial the
digits of the code.
To use Stop:
1 Label a button.
1 Dial the local telephone number (seven digits).
2 Enter programming mode by sliding the T/P
2 Press Drop (Stop).
switch to P. (Digital phones: Dial #33.)
3 Dial the authorization code (five or six digits).
3 Press the button you want to program.
To use a switchhook flash:
4 Dial *20.
1 Press Recall.
5 Leave programming mode by sliding the T/P
2 Press Hold (Pause).
switch to the center position. (Digital phones:
Dial #00.)
3 Dial the PBX or Centrex dial code sequence
that accesses the feature you want to program.
To use Touch-Tone Enable:
1 Dial the telephone number.
2 Press Transfer.
3 Dial the credit card authorization code.
3-124 MERLIN II System Features