User`s guide

How to Program
How to Use
To program a Reminder Set button:
Procedures for setting and canceling Reminder
Service calls from attendant consoles and from
1 Label a button.
individual phones are somewhat different. Follow
2 Enter programming mode by sliding the T/P
the appropriate procedure below.
switch to P. (Digital phones: Dial #33.)
NOTE:
If your console or phone has a display, it
3 Press the button you want to program.
shows the following:
4 Dial *28.
● the feature status when you enter a
5 Continue programming or leave programming
feature code or press a feature button
mode by sliding the T/P switch to the center
● new settings as you dial them
position. (Digital phones: Dial #00.)
You can check an existing setting by pressing
To program a Reminder Cancel button:
Reminder Set, verifying that the time shown on
the display is correct, then pressing Reminder Set
1 Label a button.
again.
2 Enter programming mode by sliding the T/P To set personal reminder times:
switch to P. (Digital phones: Dial #33.)
1 Take the appropriate action:
3 Press the button you want to program.
➤ Press Reminder Set.
4 Dial *27.
➤ Press Intercom-Ring or Intercom-Voice.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center
— Lift your handset.
position. (Digital phones: Dial #00.)
— Dial *81.
To program a Missed Reminder button (Display
2 Dial the 4-digit reminder time in a 12-hour
Console only):
format (1200 through 1159).
1 Label a button with a light.
3 To indicate a.m. or p.m.:
2 Enter programming mode by sliding the T/P
➤ For a.m. dial 2 (A)
switch to P.
➤ For p.m. dial 7 (P)
3 Press the button you want to program.
4 If the light next to Reminder Set goes off,
4 Dial *102.
indicating an invalid entry, repeat steps 1
through 3.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center To cancel personal reminder times:
position.
To cancel a reminder that you have set for your
phone, press Reminder Cancel or follow these
steps:
1 Press Intercom-Ring or Intercom-Voice.
2 Lift your handset.
3 Dial *82.
To set reminder times from attendant consoles:
1 Press Reminder Set or lift your handset and
dial *81.
2 Press the Auto Intercom button of the phone
for which you’re setting a time. (This can be
your own console.)
3 Dial the 4-digit reminder time in a 12-hour
format (1200 through 1159).
(Continued)
MERLIN II System Features 3-113