User`s guide

How to Program
Personalized Ringing for an analog phone:
1
2
3
Enter programming mode by sliding the T/P
switch to P.
You hear the ringing sound your phone makes.
Press Speaker.
You hear another ringing pattern.
Press Speaker repeatedly until you hear a
ringing pattern you like.
Leave programming mode by sliding the T/P
switch to the center position.
Personalized Ringing for a digital phone:
If you have a 7406D phone, use one of these
procedures to select a ringing pattern for your
phone. You can select a personalized ringing
sound by using two buttons on your phone or
using a dial code.
by
To use the Shift button and the Select Ring button
to program the Personalized Ringing feature:
1
2
3
4
5
Press Shift.
The light next to the Shift button goes on.
Press Select Ring.
The light next to the Shift button flashes. The display
unit shows the message, “Personalized Ring #x.” You
hear the current ringing sound your phone makes.
Press Select Ring again.
You hear another ringing pattern. The display unit shows
the message, “Personalized Ring #x“ for the next ringing
sound.
Press Select Ring repeatedly until you hear a
ringing pattern you like.
To save the ringing sound you have selected,
press Shift again.
The green light next to the Shift button goes off.
(Continued)
How to Use
After you have programmed your Personalized
Ringing preference, you don’t need to do
anything else to use the feature. When a call rings
at your phone, you hear the ringing pattern you
have chosen.
3-106 MERLIN II System Features