User`s guide

How to Program
1 Label a button.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *39.
5 Continue programming or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
How to Use
To Turn Night Service On and Off:
A green light next to the Night Service button is
on whenever Night Service is in effect. To turn
Night Service on or off:
1 Press Night Service (or dial #39).
To Turn Night Service With Outward Restriction
On and Off:
If the system is administered with the Outward
Restriction option, the attendant uses the
password to turn Night Service on and off. The
green light next to Night Service flashes as a
reminder to enter the password and stays on
while Night Service is in effect.
1 Press Night Service (or dial #39).
2 Dial the password.
If you don’t enter the password within 60 seconds
or if you make a dialing error, Night Service status
doesn’t change.
If this happens, just repeat the
procedure.
To Make a Call Using the Password:
To place an outside call when Night Service with
Outward Restriction is On:
1 Before you lift your handset, press Recall (for
digital phones without a Recall button, dial
#50).
2 Dial the password.
3 Lift your handset and dial the outside number.
If your system has ARS and you are making
successive calls, you must dial the password
before each call (steps 2 and 3, above). If you
don’t have ARS, press Recall (for digital phones
without a Recall button, dial #50) between calls,
without hanging up (steps 1 through 3, above).
Notify
DESCRIPTION
The Notify feature is a way for people in the MERLIN II system, other than
the attendant, to alert someone that a message is waiting. With this feature
people can program Send buttons for others to whom they often send
messages or Receive buttons for receiving messages from others, such as a
boss to his or her secretary, or vice versa.
3-98 MERLIN II System Features