User`s guide

How to Administer (Continued)
7
8
9
10
11
12
13
Perform one of the following operations:
➤ To remove the existing automatic start time for this day, press [Enter].
➤ To set or change the start time, dial two digits for the hour and two digits for the
minute, in the 24-hour format, then press
[Enter]. (For example, if you want Night
Service to go on at 5:30 p.m., dial 1730).
To set the time when Night Service should go off, press
[Stop].
Dial the number of the day of the week for which you are setting a time (Sunday = 0,
Saturday = 6).
Perform one of the following operations:
➤ To remove the existing automatic stop time for this day, press [Enter].
➤ To set or change the stop time, dial two digits for the hour and two digits for the
minute, in the 24-hour format, then press
[Enter] (For example, if you want Night
Service to go off at 8:00 a.m., dial 0800.)
To activate or deactivate Night Service with Time Set, press
[DayofWk].
Perform the appropriate action:
➤ To activate timer-controlled operation of Night Service, dial the code for the current
day of the week (0 = Sunday, 6 = Saturday) followed by
[Enter].
➤ To suspend timer-controlled operation of Night Service, dial 9 followed by [Enter].
Press Conference to continue administration or leave administration mode by sliding the
T/P switch to the center position.
Night Service Information Report:
If you have a printer attached to your system for the Call Report (SMDR) feature, you can get
a Night Service Information Report. It shows group assignments, the password, the allowed
list of emergency telephone numbers, the Exclusion list, and on and off times for Night
Service with Time Set.
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [Print], [More], [More], [More].
4 Press [NiteSrv] to begin printing.
5 Press Conference to continue administration or leave administration mode by sliding the
T/P switch to the center position.
MERLIN II System Features
3-97