User`s guide

How to Administer (Continued)
6
7
8
9
10
11
12
13
Press [Enter].
NOTE: Removing the password deactivates the Outward Restriction feature. To restore
Outward Restriction, you need to create a new password.
To administer emergency telephone numbers, press
[Emerg].
Dial the entry number (0 through 9) of the telephone number on the allowed list and
press
[Enter].
Take the appropriate action:
➤ To add or change an entry, dial the telephone number (maximum of 12 digits) and
press
[Enter].
➤ To remove an existing number, press [Drop], and press [Enter].
To assign phones to the Night Service Exclusion list or remove them
[Exclude].
Press the Auto Intercom button of each phone until the light next to
appropriate code.
Green light on
= phone is on the Exclusion List
Green light off = phone isn‘t on the Exclusion List
from this list, press
the button shows the
To administer Night Service with Time Set, press [More] and go to step 2 of the following
procedure.
Press Conference to continue administration or leave administration mode by sliding the
T/P switch to the center position.
Night Service with Time Set:
If you want Night Service to stay on for a full day (a Sunday, for example), don‘t set a start
time or a stop time for that day.
NOTE: If you have not set the MERLIN II system clock, follow the procedures in “Call
Report” to set the time and date before you begin to administer Night Service with
Time Set. Follow those steps whenever you need to reset the system clock (when
Daylight Savings Time goes into effect, for example).
1 Have your completed Form 7c, Enhanced Night Service with Time Set, planning form
handy.
2 Enter administration mode by sliding the T/P switch to P.
3 Press Conference twice.
The administration menu appears.
4 Press [More], [Night], [More].
5 To set the time at which Night Service should go on, press [Start].
6 Dial the number for the day of the week for which you are setting a time. (Sunday = 0,
Saturday = 6), followed by
[Enter].
(Continued)
3-96 MERLIN II System Features