User`s guide

RELATED FEATURES
● Attendant (Automatic)
How to Administer
Night Service with Group Assignment:
To add or remove phones from Night Service groups:
1
2
3
4
5
6
7
8
9
10
Have your completed Form 7a, Enhanced Night Service with Group Assignment,
planning form handy.
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press [More], [Night].
Press [Group].
Dial the intercom number of the attendant for whom you are setting up or changing a
Night Service group and press
[Enter].
Press the Auto Intercom button of each phone you want to add to or remove from this
attendant’s group until the light beside the button shows the appropriate code.
Green light on =
phone is included in the Night Service group
Green light off =
phone is not included in the Night Service group
To administer other groups, press [Group] and repeat steps 6 and 7.
To administer Night Service with Outward Restriction, press
[OutRstr] and go to step 2 of
the following procedure.
Press Conference to continue administration or leave administration
T/P switch to the center position.
Night Service with Outward Restriction:
To
1
2
3
4
5
mode by sliding the
set up or change your password, list of emergency numbers, or exclusion list.
Have your completed Form 7b, Enhanced Night Service with Outward Restriction,
planning form handy.
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
The administration menu appears.
Press [More], [Night], [OutRstr].
Take one of these actions:
➤ To create a new password, dial any four digits (0 through 9).
➤ To remove an existing password, press [Drop].
(Continued)
MERLIN II System Features 3-95