User`s guide

How to Administer (Continued)
To
1
2
3
4
5
6
7
8
9
10
assign labels to stations:
Enter administration mode
Press Conference twice.
by sliding the T/P switch to P.
The administration menu appears.
Press [More], [More], [Label].
The system prompts you to designate
the type of labels you are assigning.
Press [Stations].
The system prompts you to enter the station number.
Dial the station (intercom) number.
Press
[Enter].
NOTE: To correct the entry, press backspace
Enter the label for the station. This can be up
then press
[Enter].
to seven characters,
including all 26 capital
letters, the numbers 0 through 9, and the ampersand (&), dash (-), space ( ), colon (:),
asterisk (*), and pound sign (#). Figure 3-1 under “Administration Overlay” at the
beginning of this section shows which buttons on the console represent letters and special
characters.
NOTE: Correct an entry by pressing backspace and then
[Enter].
Press [Enter].
Repeat steps 5 through 8 to assign labels to the remaining stations.
Press Conference to return to the main administration menu or leave administration mode
by sliding the T/P switch to the center position.
Last Number Redial
DESCRIPTION
With a Last Number Redial button, you can redial with one touch the number
you dialed most recently. You do not need to do anything to save the
number.
CONSIDERATIONS
● The Last Number Redial button saves manually dialed outside telephone
numbers and numbers dialed with an Outside Auto Dial button.
● If you try to program a second Last Number Redial button, the first one is
automatically removed.
MERLIN II System Features 3-73