Specifications
SYSTEM SPEED DIAL
3 Dial 00.
The green light goes on next to the Auto
intercom
button for each voice terminal that has
been assigned this list.
4
Perform one of the following procedures:
)
Touch the Auto Intercom button for the voice terminal that you want
to assign the list.
b
Use the appropriate code from the Dial Code
chart
earlier in this
section under the heading “Using the BIS-22 Voice Terminal as an
Administrator Console” for the voice terminal to which the allowed list
is to be assigned.
5 Touch Administer.
The console beeps twice.
6
Continue to administer the system, or leave administration mode.
You can assign System Speed Dial codes to frequently called telephone
numbers or to account numbers you want to appear on call reports (if you
have the Call Report option). All system voice terminals will have access to
these System Speed Dial codes.
Assigning Codes to Telephone Numbers
As you learned when you planned your system, you can store telephone
numbers under System Speed Dial codes with or without Restriction
Override. You can also specify which telephone numbers stored under codes
will be printed out in full on call reports and which will be identified in the
reports by System Speed Dial code only. Your System Speed Dial Form
should show which, if any, numbers you have designated for Restriction
Override and which, if any, you have designated as private (that is, not to be
printed on Call Reports).
To assign System Speed Dial codes:
1 Enter administration mode.
The red lights go on next to
Administer
and
Restrict.
2
Dial the code (
#60
through
#89
or
#900
through
#999)
that you are
assigning to the telephone number.
3
Dial one of the following codes:
w
If you did not put a check mark in the “Restriction Override” column,
dial
*90.
w
If you put a check mark in the “Restriction Override” column, dial
*92.
4
Dial the telephone number. If you checked the “Private” column next to
the number, dial a * before the telephone number.
NOTE:
Private numbers will not appear on Call Reports or on display
voice terminals. However, private numbers will appear on System
Feature Reports.