Specifications

5
Continue to administer the system, or leave administration mode.
If you entered a number other than 2 in the “Ring Interval” column for SA,
follow the procedure below to change the ring interval for incoming SA calls:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2
Dial *764 plus the number of rings (0 through 9).
NOTE: If 0 is selected, the voice terminal will not ring, and calls will be
answered immediately.
3 Touch Administer.
The console beeps twice.
4
Continue to administer the system, or leave administration mode.
If you put an entry in the column headed “Modify Message” for SA, follow
the procedure below:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2
Dial *77 and the message number desired:
0
=
No voice message; call is placed on hold immediately
I
=
Message says, n Please hold”
2
=
Message says, “Please hold. Your call
will be handled momentarily. ”
3 Touch Administer.
4
Continue to administer the system, or leave administration mode.
This concludes outside line administration. You can go on now to
’ Systemwide Options, ’
or you can leave further administration for another
time.
3-30
Line Assignments for Voice Terminals