Specifications
RINGING OPTIONS
BUTTON-FREE LINE
OPERATION
3
Touch all the line buttons that have a green light on next to them.
The green light next to each line button goes off.
4
In the order that you want lines to appear on the voice terminal, touch all
the line buttons again. If you want to reserve a button(s) for feature
programming, touch that button(s) last.
The green light goes on next to the button you touch.
5 Touch Administer.
The console beeps
twice.
6
Continue to administer the system, or leave administration mode.
Perform the following procedure to select the ringing option for each line
assigned to your voice terminals:
1
Slide the
TIP
switch to P.
2
Touch the line button you want to program.
3
Dial one of the codes for the type of ringing you have indicated on the
Line Assignments Form:
b
Dial
*35
for no ring (N).
The red light next to the button goes
off.
)
Dial
*36
for delayed ring (D).
The red light next to the button flashes.
)
Dial
*37
for immediate ring (I).
The red light next to the button goes on steady.
4
Repeat steps 2 and 3 for each line button.
5
When you’ve finished programming, slide the
TIP
switch to the center
position.
If you selected Button-Free Line Operation, so that incoming lines on a voice
terminal are not assigned to buttons, you can administer whether or not calls
should ring at the voice terminal. If the voice terminal is in a public place,
such as‘a building lobby, you can select the no ring option.
If you circled “I” for Immediate Ring or
“N”
for No Ring on the Line
Assignments for Voice Terminals form, follow the procedure below:
1
Enter administration mode.
The red lights
go
on next to
Administer
and
Restrict.
2
Follow the appropriate procedure:
b
Touch the Auto Intercom button for the voice terminal you’re
administering.
The green light goes on.
b
Dial the intercom number for the voice terminal you’re administering.
3
Touch the line button until the green light shows the assignment you
want:
Green light on =
the line is assigned to the voice terminal
Green light
off
=
the line is not assigned to the voice terminal
Line Assianments for Voice Terminals
3-25