Specifications

l On every voice terminal (except a 5-button model), the button directly
above Conference is always the Intercom button. You can’t assign a line
or feature to it.
l On every voice terminal (except a 5-button model), the button above
Transfer is always a programmable feature button. You can’t assign a line
to it.
l When you assign lines to a voice terminal, the system assigns them to line
buttons in the order shown in Figure 3-8 below. This sequence is also the
voice terminal’s automatic line selection sequence-the order in which the
system selects lines for the voice terminal’s outgoing calls-unless you
program a different automatic line selection sequence.
l On any voice terminal, line buttons without lines assigned to them can
have feature buttons programmed on them.
FIGURE 3-8 The order in which,the system assigns lines to buttons.
To assign lines to a voice terminal:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2 Perform one of the following procedures:
b Touch the Auto Intercom button for the voice terminal you’re
administering.
A green light goes on next to the Auto Intercom button. Green lights also go on next
to the buttons of any lines already assigned to the voice terminal.
D Dial the intercom number for the voice terminal you are administering.
Green lights go on next to the buttons of any lines already assigned to the voice
terminal.
3-24 Line Assignments for Voice Terminals