Specifications

PROGRAM MODE LOCK
If you placed a check mark in the “Lock” column of the “Voice Terminal”
form you want to prevent the voice terminal from reprogramming any of the
features assigned to it. Use the procedure below to prevent the user of a voice
terminal from reprogramming any of the features assigned to it:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2 Dial *89.
2 Perform one of the following procedures:
P Touch the Auto Intercom button of the voice terminal you are
administering.
w Dial the intercom number of the voice terminal you are administering.
4 Touch Administer.
The console beeps twice.
5 Continue to administer the system, or leave administration mode.
This concludes basic administration.
You can use your system now, just as it
is, and leave further administration until later, or you can go on and
customize the outside telephone line assignments to individual voice
terminals.
1-33 Rscir Arlminictratinn