Specifications
b
Dial
*15
to set the volume to high.
3 Touch Administer.
The console beeps twice.
4
Continue to administer the system, or leave administration mode.
BACKGROUND MUSIC
If you have an optional audio source connected to the Music-on-Hold jack
and an optional loudspeaker paging system, you can regulate the volume of
background music with a dial code in system administration. Locate the
column headed “Background Music” on the System Configuration Form, then
dial the appropriate code given in the procedure below:
1
Enter administration mode.
The red lights
go
on next to
Administer
and
Restrict.
3
Dial one of the following codes to set the volume you prefer:
)
Dial
*16
to turn off the background music.
b
Dial
*17
to set the volume to low.
b
Dial
*18
to set the volume to medium.
b
Dial
*19
to set the volume to high.
3
Touch
Administer.
The console beeps twice.
4
Continue to administer the system, or leave administration mode.
HOLD DISCONNECT
INTERVAL
If you placed a check mark in the column marked “Short” under “Hold
Disconnect Interval” on the System Configuration Form, then your local
telephone company uses the 50 millisecond disconnect interval instead of the
450 millisecond interval. If your local telephone company uses a short
interval, you must administer this setting for each incoming line in the
system.
Follow the procedure below to administer a short hold disconnect interval:
1
Enter administration mode.
The red lights
go
on next to
Administer
and
Restrict.
2 Dial
*69.
3
Touch each incoming line button to change the disconnect interval.
Green light on = line assigned the long disconnect interval
Green light off = line assigned the short disconnect
internal
4 Touch Administer.
The console beeps twice.
5
Continue to administer the system, or leave administration mode.
VOICE TERMINAL JACK
ASSIGNMENTS
Your MERLIN Plus system has twenty jacks for voice terminals and special
features. If you are using the
ASA
features (CF, DXD, RLA, or SA), Busy
Buster (BB), Call Report, or System Feature Report (Reports), you need to
assign a jack for them. The “Voice Terminal” form indicates the default jack
assignments for these features and the main attendants, if you have changed
these assignments on your form, use the appropriate procedure below to
Basic Administration
3-13