Specifications

MUSIC-ON-HOLD
2 Dial *81.
3 Dial two digits for the hour (00 through 23) using 24-hour time.
4 Dial two digits for the minute (00 through 59).
5 Touch Administer.
The console beeps twice.
6 Continue to administer the system, or leave administration mode.
Since the system is factory set to have no calls reported, you must now select
the type of calls you want reported. Locate the column headed “Call Report”
on the System Configuration Form and follow the procedures below:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2 Dial *84.
3 Dial a number code 0 through 2 to specify the kind of calls to be reported:
w
If you do not want any calls reported, dial 0.
D
If you only want outgoing calls reported, dial 1.
b
If you want outgoing and incoming calls reported, dial 2.
4 Touch Administer.
The console beeps twice.
6 Continue to administer the system, or leave administration mode.
Once you’ve selected the type of report, you need to specify the duration of
the calls reported. If you filled in “1” next to “Minimum Duration of Recorded
Calls, ’ you don’t have to do anything here since the system is set for one
minute. If you specified another duration (0, or 2 through 9) follow this
procedure:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2 Dial “83.
3 Dial one digit from 0 to 9 for the num.ber of minutes.
4 Touch Administer.
The console beeps twice.
6 Continue to administer the system, or leave administration mode.
If you have an optional audio source and want to control the volume through
system administration, locate the column headed “Music-on-Hold” on the
System Configuration Form, then dial the appropriate code given in the
procedure below:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2 Dial one of the following codes to set the volume you prefer:
)
Dial *12 to turn off Music-on-Hold.
B
Dial *13 to set the volume to low.
)
Dial *14 to set the volume to medium.