Specifications
For example, if you want to assign voice terminal 21 to a Group Page group
or add the voice terminal to an Allowed List, use the dial code,
#04,
that
corresponds with intercom number 21.
NOTE:
It is important that you record your decisions about Allowed and
Disallowed Lists on the Call Restrictions Assignment Form; record
decisions about your Call Report and/or System Feature Report jack
assignment and Group Page on the System Configuration Form.
Keep these forms handy in case you decide to make changes.
THE BIS-10 VOICE
TERMINAL USED AS AN
ADMINISTRATOR
CONSOLE
The BIS-10 voice terminal is not recommended to be used as the
administrator/attendant console because the administrator cannot see the
buttons being administered. Furthermore, some features cannot be
programmed from this voice terminal.
However, if you are using a BIS-10
voice terminal as an administrator/attendant console to perform the
administration procedures for many of the special features, follow the
instructions provided for the BIS-22 voice terminal, which generally require
that you enter the dial codes
(see
chart below) directly
without
touching an
Auto Intercom button.
If the
intercom
number is:
Dial this code:
Intercom 10
#22
Intercom 11
#21
Intercom 12
#20
Intercom 13
#19
Intercom 14
#18
Intercom 15
#17
Intercom 16
#16
Intercom 17
#15
Intercom 18
#14
Intercom 19
#13
If the intercom
number is:
Intercom 20
Intercom 21
Intercom 22
Intercom 23
Intercom 24
Intercom 25
Intercom 26
Intercom 27
Intercom 28
Intercom 29
Dial this code:
#03
#04
#OS
#06
#07
#08
#09
#lO
#ll
#12
ADMINISTRATION MODE
The information under the next three headings tells you how to do the
following:
l
Make button label sheets for the administrator/attendant console
l
Enter administration mode
l
Leave administration mode
Labeling Buttons
The button label sheets
on
your administrator/attendant console have to show
how the functions of certain buttons change when you shift from the normal
call-handling mode to the administration mode. Figure 3-2 shows you what
the button labels should look like for a BIS-34D voice terminal with Display.
Figure 3-3 shows the button labels for a BIS-22 voice terminal.
Administration Preview 3-i