Specifications

SYMPTOM: ALL VOICE
TERMINAL LIGHTS ABE
OUT WITH NO DIAL TONE
(CONTINUED).
Possible Cause 3: Faulty power outlet.
Do This
Test the outlet by
plugging
in an appliance such as a
lamp or a radio.
If
The appliance doesn’t
work
The appliance works
SYMPTOM: PROBLEM
WITH CALLS ON HOLD.
Then
The outlet is faulty.
Go to Possible Cause 4.
Possible Cause 4: A module is loose.
Do This
If
Then
Set the control unit
power switch to Ofi.
All modules are secure
You’ve solved the
and the red warning light problem.
goes off
NOTE:
You will damage the
All modules are secure
Contact your equipment
modules if you don’t turn and the red warning light
supplier. When calling
the power off. remains on
your supplier, identify
Remove the top cover
your system as the
and then remove and
MERLIN Plus R2 system.
replace each module,
making sure each is
securely seated in its slot.
Replace the top cover and
fasten its screw. Set the
power switch back to On.
Possible Cause 1: Call was inadvertently placed on exclusive hold.
Do This If Then
At the voice terminal that
The trouble no longer The call was placed on
put the call on hold,
appears. Exclusive Hold.
touch the button of the
held call.
The trouble still appears. Have another system
voice terminal pick up the
held call.
Your voice terminal is
faulty, contact your
equipment supplier.