Specifications

Quick Reference to Administration Procedures for ASA
Administration Procedure
--
designate a jack for the ASA features (jack
18 is the initial assignment).
4ssign an alternate attendant to handle
4SA calls.
Select the lines, except tie lines, that you
rrrrant to add to or remove from CFIDXD,
RLA, or SA line groups.
Enable or disable the voice message for all
lines in your CF and/or DXD incoming
line groups.
Do This
1 Enter administration mode.
2 Dial *59.
3 Touch the Auto Intercom button or dial the intercom number for the
jack you want to assign to ASA.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *79.
3 Touch the Auto Intercom button or dial the intercom number of the
voice terminal you want to assign as the alternate attendant console.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial the appropriate code:
*51 for the CF incoming line group
*52 for the CF outgoing line group
*58 for the DXD incoming line group
*54 for the RLA incoming line group
*75 for SA incoming line group
3 Touch line buttons until the green light next to it indicates its
assignment to the list.
Green light on = line is assigned to the list
Green light off = line is not assigned to the list
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *30.
3 Dial the appropriate code:
1 to turn on the Call Forwarding voice message
0 to turn off the voice message
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
6-22 Quick Reference Guide to ASA Features