Specifications

Quick Reference Guide to ASA Features
The Automatic System Access features allow you more flexible use of your
MERLIN Plus system and your outside lines. The ASA features include:
l Call Forwarding (CF)
When the system is in CF mode, incoming calls on designated lines are
connected to a Voice Synthesis Processor (VSP) in the control unit for a
message. Meanwhile, the control unit calls the telephone number to
which calls are being forwarded and uses the system’s Conference feature
to connect the incoming call to the outgoing call.
l Direct Extension Dialing (DXD)
When you put the system in DXD mode, the control unit connects
incoming calls on designated lines to the VSP for a message. Meanwhile,
the caller dials the extension number (a 2-digit intercom number), and the
control unit transfers the call to that extension.
l Remote Line Access (RLA)
When the system is in RLA mode, you can call in from outside and use a
password to gain access to one of the system’s outside lines. You can alsc
use the RLA feature to change the telephone number to which calls are
being forwarded during CF operation.
The VSP prompts you through the
necessary procedures.
l System Answer (SA)
When the attendant or the alternate attendant activates the System
Answer button, selected incoming calls are answered automatically and
placed on hold. The system administrator can choose to have the caller
hear a special message before being placed on hold or, if connected to a
compatible audio-source, a pre-recorded message or music can be played
instead.
This quick reference helps you administer, program, and use these features
more quickly. For more information about the ASA features, refer to Section
5, “Reference. ’
Quick Reference Guide to ASA Features 6-21