Specifications

Administration Procedure
Change the password for the CF or RLA
feature.
Enter or change the telephone number to
which you want calls forwarded.
Reset the system.
Select a message to be played with System
Answer.
_. .-.
.~~
Do This
1 Enter administration mode.
2 Dial *56.
3 Dial an intercom number plus three digits.
NOTE: To invalidate any passwrod, dial the intercom number and
000.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *53.
3 Dial the new CF destination telephone number.
NOTE: To remove a CF destination number without replacing it,
touch Administer.
4 Touch Administer.
The console beeps tzuice.
5 Leave administration mode.
WARNING: This procedure erases all system administration and
telephone programming, returns the system to its factory settings, and
restores initial feature assignments to the phones. Use this feature only
when you want to change the system radically,
1 Enter administration mode.
2 Dial *99198.
The console beeps twice.
3 Turn the power off, wait 10 seconds, and then turn it on again.
4 Leave administration mode.
1 Enter administration mode.
2 Did*77 followed by the desired option:
0 = no voice message
:
= “Please hold”
= “Please hold, your call will be handled momentarily”
NOTE: If a line number is administered using *50, the following
message is appended to the end of message 1 and 2: “You have
reached . . .’ where . . .
is a number entered by the system
administrator for Call Forwarding.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode.
6-10 Quick Reference Guide to System Administration