Specifications

Administration Procedure
Designate a voice terminal jack on the
control unit for System Feature Reports.
Program a telephone using Centralized
Programming.
Lock the programming function at a voice
terminal
Designate a voice terminal jack on the
control unit for Busy Buster.
Do This
1 Enter administration mode.
2 Dial *85.
If previously administered, the green right goes on next to the Auto
Intercom button for the jack to zuhich the data collector and printer are
currently assigned.
3 Touch the Auto Intercom button of the jack to which the data
collector and printer are connected.
The green fight goes ofi next to the Auto Intercom button for the old jack,
rnd the green light next to the Auto Intercom button for the new jack goes
on.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the
phone you want to program.
3 Touch Conference.
4 Program the telephone.
5 Touch Conference.
6 Leave administration mode.
1 Enter administration mode.
2 Dial *89.
3 Touch the Auto Intercom button or dial the dial code of the voice
terminal you are administering.
Green light on = the voice terminal is locked
Green light off = the voice terminal is unlocked and can be programmed
NOTE: Touch CONFERENCE to enable program mode lock
systemwide.
Touch DROP to disable program mode lock systemwide.
4 Totich Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial*35.
3 Touch the Auto Intercom button or dial the intercom number for the
voice terminal jack to which you want the BB jack connected.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
6-6 Quick Reference Guide to System Administration