Specifications

Administration Procedure
Assign System Speed Dial codes to
telephone numbers dnd account numbers.
Assigning or removing a voice terminal
from a paging group.
Set the Transfer Return Interval.
Do This
Enter administration mode.
Dial the code ( I#60 through # 89 or # 900 through # 999) you are
assigning to the number.
Dial either:
*90 to assign the code without Restriction Override
*92 to assign the code with Restriction Override
*88 to assign the code to an account number.
Dial the telephone number or account number.
NOTE: To designate a telephone number as private (not printed on
call reports), dial * before the number in step 4.
lf the telephone number or account number has the maximum allozred 16
digits, the console beeps fzoice zohen you enter the sixteenth digit.
Touch Administer.
The console beeps fzuice.
Leave administration mode.
Enter administration mode.
Dial the code for the paging group (*71 or *72).
Touch the Auto Intercom button or dial the appropriate code from
the dial code chart for the phone you want to add or remove.
Green light on = telephone is assigned
Green light off = telephone is removed
NOTE: Touch DROP to remove all voice terminals from a paging
group.
Touch Administer.
The console beeps twice.
Leave administration mode.
1 Enter administration mode.
2 Dial the code for the transfer return interval you want (up to nine
* rings):
*2 plus the number of rings wanted (*25 = five rings).
*20 for transferred calls to not be returned.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode.
Quick Reference Guide to System Administration
6-5