Specifications

Administration Procedure
Add an ent? to the Disallowed List.
i
Remove an entry frbm the Disalloved
List.
Assign a Disallowed List to a voice
terminal. -
Copy line assignments, call restrictions,
and programmed features from one
telephone (the source) to another (the
target).
Change the Hold Disconnect Interval.
Do This
1 Enter administration mode.
2 Dial *09 followed by the Disallowed List code (01 to 20).
3 Dial the disallowed number (up to 16 digits).
4 Touch Administer.
The console beeps tzoice.
5 Leave administration mode.
--
1 Enter administration mode.
2 Dial *09 and the Disallowed List code (01-20).
3 Touch Administer.
The console beeps tzuice.
4 Leave administration mode.
1 Enter administration mode.
2 Dial *09 then 00.
3 Touch the Auto Intercom or dial the appropriate intercom code
number of the voice terminal you want to assign the list to.
Green light on = list is assigned
Green light of = list is not assigned
4 Touch Administer.
The console beep twice.
5 Leave adniinistration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for tk
target voice terminal.
3 Touch Copy.
4 Touch the Auto Intercom button or dial the intercom number for tk
souke voice terminal.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
1 Enter administration mode.
2 Dial l 69.
3 Touch the line button of the incoming line that you want to change
the hold disconnect interval.
Green fight on = the long (450 millisecond) interval is selected.
Green light off = the short (50 millisecond) interval is selected.
64 Quick Reference Guide to System Administration