Specifications

r
Administration Procedure
I-
-.
I ,LIake Line A and.or Line i? Private.
Customize line assignments b a
telephone.
Specify number of lines in the system
Assign Button-Free Line Operation to a
telephone.
--r
-1..
Do This
1 Enter administration mode.
2 Dial * 57. The green lights next to the buttons for Line A and Line
E indicate their status:
Green light on
= privacy actizye
Green light off = privacy inactiz~e
3 Touch the line button until the green light indicates the privacy
status you want.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
--...
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the
phone.
3 Touch the line buttons to add or remove lines. Add the lines in the
order that they should appear.
Green light on = line is assigned
Green light off = line is not assigned
4 Leave administration mode.
1 Enter administration mode.
2 Dial ‘4.
3 Dial the number of lines in the system (l-8).
Q Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the
phone.
3 Tou?h the line button until the green light next to it shows the line
assignment you want:
Green light on = the line is assigned to the voice terminal
Green light off = the line is not assigned to the voice terminal
Q Dial either *31 if you want the phone to ring on incoming calls or
‘32 if you don’t want it to ring.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
NOTE: To make all outside lines reappear on the voice terminal, enter
administration mode, touch the Auto Intercom button or dial the
intercom number of the phone, dial ‘34, touch Administer, and leave
administration mode.
6-2
Quick Reference Guide to System Administration