Specifications

ADMINISTRATION
PROGRAMMING
You should use the Music-on-Hold feature with DXD so that callers can hear
music when they are placed on hold. See “Direct Extension Dialing” in this
section.
You can also use the Music-on-Hold feature with System Answer, so that
callers hear a special prerecorded message or music while they are waiting.
If your responsibilities do not include system administration, skip this
information.
From the administrator/attendant console, you can set the volume for Music-
on-Hold or turn it off by dialing one of the four settings listed below:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial one of the following codes to set the volume you prefer.
)
Dial *12 to turn off Music-on-Hold.
D
Dial *13 to set the volume to low.
w
Dial *14 to set the volume to medium.
b
Dial *15 to set the volume to high.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
If you want to set the volume on the background music for the building or
turn the music off, dial one of the following codes:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial one of the following codes to set the volume you prefer:
b
Dial *16 to turn off the background music.
s
w
Dial *17 to set the volume to low.
D
Dial *18 to set the volume to medium.
b
Dial *19 to set the volume to high.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
None
5-l 42 Accessory Equipment