Specifications

PROGRAMMING
HOW TO USE
2 Dial one of the following codes to set the volume you prefer:
B Dial *16 to turn off the background music.
b Dial *17 to set the volume to low.
b Dial *X3 to set the volume to medium.
w Dial *19 to set the volume to high.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
’ position.
Administration procedures for CO line connection:
1 Slide the TIP switch to P and touch Administer.
2 Dial *91
3 Touch the button for the line you want to be the paging port.
Green light on = line added to paging port
Green light off = line removed from paging port
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the TIP switch to the center
position.
Refer to “Loudspeaker Page” earlier in this section.
Using the Loudspeaker Paging System connected to the Page Jack:
To use the Loudspeaker Page button:
1 Touch Loudspeaker Page.
2 When you hear the beep, lift your handset and make your announcement.
To use this feature dialing a code:
1 Touch Intercom.
2 Lift your handset.
3 Dial 6.
4 When you hear the beep, make your announcement.
The loudspeaker will turn off automatically when you hang up.
Using the Loudspeaker Paging System connected to a CO line:
1 Touch the loudspeaker page’s line button.
2 Follow the instructions provided with your loudspeaker page system.
3 If your loudspeaker page system provides a warning tone (beep), wait for
the tone before making your announcement.
5140 Accessory Equipment