Specifications

CONSIDERATIONS
Considerations for the Page Jack connection:
The loudness of the loudspeaker paging system is controlled by the
loudspeaker paging system only.
To control the loudness of the background music throughout the building, or
to turn off the background music, the system administrator can dial a code at
the administrator/attendant console for the preferred volume. Background
music volume can also be controlled at the music source. The following are
the jack pin-out specifications for the loudspeaker paging system. Pin
numbers from left to right (1 through 8) are:
0 4,5 for voice
l 3,6 for contact closure
l 1,2,7,8 are unused
Considerations for CO line connection:
If the paging unit is connected to a CO port but is administered as a paging
port, it is treated differently than a CO line, and has the following
restrictions:
l An auxiliary jack cannot be used as a paging port.
l Conferencing to this paging port or adding this port to a conference call is
prohibited.
l Transferring of the paging port is prohibited.
l Bridging onto the paging port is prohibited.
l No Call Reports can be generated for this line.
l No Call Restrictions apply, therefore, even outward restricted voice
terminals could use this line for toll calls.
l The volume is controlled by the loudspeaker paging system only.
l Unlike the page jack connection, the CO connection provides no signal to
alert you when the loudspeaker paging system has been activated.
If you want to save available feature buttons for other features, use the dial
code instead of programming a Loudspeaker Page button.
ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
Administration for the Page Jack connection:
To set the volume of background music, or to turn the music off, dial one of
the following codes:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
Accessory Equipment 5-139