Specifications

ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
1 Assign lines to the basic telephone:
a Enter administration mode by sliding the TIP switch to P and touching
Administer.
b Dial the intercom number or touch the Auto Intercom button for the
basic telephone that you are administering.
A green light comes on next to the Auto Intercom button. Green lights also come on
next to the buttons of any lines already assigned to the telephone.
. c Touch each line button so that the green light next to it shows the line
assignment you prefer.
Green light on = the line is assigned to the telephone
Green light ojfj = the line is not assigned to the telephone
2 To restrict the type of calls that the basic telephone can place:
a Touch Restrict until the green light next to it shows the code for the _
call restrictions you want the telephone to have:
Steady green light = Unrestricted (all calls permitted)
Flashing green light = Toll restricted (local and intercom calls)
Green light off = Outward restricted (intercom calls)
b When you are finished administering the basic telephone, touch
Administer.
The console beeps twice.
c Leave adrninistr#ion’ mode by sliding the TIP switch to the center
position.
3 Then connect a MERLIN Plus system voice terminal directly to the control
unit voice terminal jack to which you plan to connect the BTMI. (You can
also program the basic telephone by using the Centralized Programming
feature on the administration/attendant console. For more information on
this feature, see ‘Centralized Programming. “)
4 Program this substitute telephone for Voice Announcement Disable:
a Slide the TIP switch to P.
b Touch the Intercom button until the green light next to it goes off.
5 If you want to change the order in which the system selects available lines
for this telephone, assign an Automatic Line Selection sequence.
a While in programming mode, dial **.
b Touch the line buttons in the order you want them to be selected.
c When you are finished programming the basic telephone, slide the TIP
switch to the center position.
6 If you want the basic telephone not to ring on specified lines, use the
Ringing Options feature.
While in programming mode, touch the line for
which you want to program a ringing option:
a If you don’t want the phone to ring, dial *35.
b If you want the phone to ring immediately when a call comes in, dial
*37.
5-130 Accessory Equipment