Specifications

HOW TO USE
Ask your administrator whether you need to dial a tolI prefix ( a 1 or a 0)
before you dial an area code and a telephone number.
Tones
DESCRIPTION
Your MERLIN Plus system and your voice terminal provide the following
tones to inform you of the progress of a call you are placing or are about to
place. There are also tones that let you know you are in administration or
programming mode and a tone to tell you that your voice terminal is working
satisfactorily.
Feedback
Dial tone
Busy tone
Voice signal
tone
Dialing
feedback
Ringing tone
Testing
feedback
Programming
reminder
Error/Deny
tone
Confirmation
tone
Hold
Reminder
Sound
Steady tone
A slow pulsed tone
A beep
For Touch-Tone lines a series
You have dialed another digit
of tones
of the telephone number.
For.rotary lines a series of
rotary pulses
A ringing sound
A steady ringing sound
Your voice terminal rings
every 5 seconds to remind you
that you can’t place or receive
calls.
-
One beep
-.
Tbvo l~eps
-
One beep every minute
-
Meaning of the Feedback
You can begin dialing tyhen
you are ready.
The line is busy.
You can announce the call
through the other person’s
voice terminal speaker.
The call is ringing at the other
person’s phone.
Your MERLIN Plus system ha
been-installed correctly.
You are in programming mod{
and cannot place or receive
calls.
You have made an error in
administration and should try
the step again.
The administration feature ha!
been entered into the system.
You have a call on hold.
The MERLIN Plus system also provides you with the following ringing
sounds or voice announcements so that you know immediately what kind of
call you are receiving.
MERLIN Plus System Features
5-119