Specifications

Toll Prefix Setting
DESCRIPTION
In most telephone systems people must dial a toll prefix (a 1 or a 0) before
they dial an area code and telephone number. When the MERLIN Plus
system is installed, it is set for dialing a toll prefix. If people in your system
don’t need to dial a toll prefix, the system administrator must set the system
for dialing the area code only.
CONSIDERATIONS
None
ADMINISTRATION
If your responsibilities do not include system administration, skip this
information. To administer the system so people can dial an area code and
telephone number without a toll prefix:
1 Enter administration mode by sliding the T/l? switch to P and touching
Administer.
2 Dial *37.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
To change the syste,m setting so that people must dial a tolI prefix before an
area code and a telephone number:
f Enter administration mode by sliding the TIP switch to P and touching
Administer. m
2 Dial *36.
3 Touch Administer.
The console beeps twice.
4 Leave adkinistration mode by sliding the TIP switch to the center
position.
PROGRAMMING
None
1 .P
5l
1 l P
id
5-l 18 MERLIN Plus System Features