Specifications

PROGRAMMING
HOW TO USE
4 Dial the telephone number. (If you want the number to be private so that
only the dial code appears on Call Reports and on display voice terminals,
insert a * before the telephone number. However, private numbers do
appear on System Feature Reports.)
For example, for a private number with Restriction Override, dial a
System Speed Dial code (such as #67 or #936), *92, and a telephone
number with a * before it, such as *l-617-555-1234.
5 Touch Administer.
The console beeps twice.
6 Repeat the last four steps for each telephone number to which you are
assigning a System Speed Dial code.
7 Leave administration mode by sliding the TIP switch to the center position.
To program a button for a System Speed Dial code assigned to a telephone
number:
1 Label the button with a name and/or a number.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *95 plus a System Speed Dial code number from 60 through 89 and
900 through 999 that your administrator can give you.
5 Slide the TIP switch to the center position.
In order to use the System Speed Dial feature, you can use a Speed Dial code
or touch a programmed button.
To place a calI by dialing a System Speed Dial code:
1 Touch Speakerphone or lift your handset.
2 Dial a System Speed Dial code ( # 60 through # 89 or # 900 through # 999).
To place a caII using a button programmed for a specific System Speed Dial
code:
1 Touch Speakerphone or lift your handset.
5-116 MERLIN Plus System Features