Specifications

l To program a pause, touch Hold.
l To program a stop, touch Drop.
l To program Touch-Tone Enable, touch Transfer.
l To program a switchhook flash at the beginning of a dialing sequence,
touch Recall and then touch Hold.
NOTE: If the first digit of a System Speed Dial number is the special
character Recall, follow it by a pause (also a special character) when
programming the dial sequence. If you need to use Recall in other than
the first digit of the dialing sequence of a System Speed Dial number, you
cannot use the Speed Dial feature.
(For more information about using special characters in a dialing sequence,
including PBX, Centrex, and Custom Calling features, see “Special
Characters. “)
ADMINISTRATION
If a number to which the administrator assigns a System Speed Dial code
contains a ” # ” character, the character must be entered twice (For example,
9 # # 123). A single ” # ” character ends administration of the current Speed
Dial code.
When the administrator has dialed the maximum 16 characters for a System
Speed Dial code, the system beeps twice to confirm the entry and to remind
the administrator that he or she cannot dial any more characters. If the
administrator dials less than 16 characters, the system does not beep.
The administrator should give a copy of the System Speed Dial code
assignments to each person who will be using these codes.
People can dial the codes or program a button for specific Speed Dial codes.
If your responsibilities do not include system administration, skip this
information.
Before you administer the System Speed Dial feature, refer to the System
Speed DialForm that you have filled out.
To assign System Speed Dial codes to frequently dialed telephone numbers:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial the code ( # 60 through # 89 or # 900 through #999) that you are
assigning to the telephone number.
3 Dial one of the following codes:
b Dial *90 to assign the Speed Dial code (without Restriction Override).
For example, if you want the Speed Dial number to have the same
restrictions as the actual telephone number, that is, call or toll
restrictions still apply with this number, dial the System Speed Dial
code (such as # 67 or # 936), *90, and then the telephone number.
b Dial *92 to assign the Speed Dial code with Restriction Override.
For example, if you want to assign a System Speed Dial code to a
telephone number that anyone in the system can dial, regardless of any
previously placed restrictions, dial the System Speed Dial code (such
as # 67 or # 936), *92, and then the telephone number.
MERLIN Plus System Features 5-l 15