Specifications

ADMINISTRATION
NOTE: If you are using the same printer and data collector for both
features and change the voice terminal jack assignment, you must
administer the new jack assignment for both features.
You cannot use the same jack that you used for ASA but you can use
the same jack that you used for BB, by using the 450F adapter and
cord supplied with the data collector. If necessary, you can change the
jack assignments for BB and ASA.
The report for each voice terminal shows all voice terminals as having 34-
buttons. This allows flexibility for upgrading and changing voice terminals.
If your responsibilities do not include system’administration, skip this
information.
To set the date and the time, to assign a voice terminal jack for the System
Feature Report, and to print or to cancel a report, use the following
procedures.
The Date and the Time. (If you have already set the date and time for the
Call Report feature, you don’t have to do it again.)
To set today’s date:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial *80.
3 Dial two digits for the month (01 through 12).
4 Dial two digits for the day (01 through 31).
5 Dial two digits for the year (00 through 99).
For example, if the date is May 16,1986, dial *80 05 16 86.
6 Touch Administer.
The console beeps twice.
7 Leave administration mode by sliding the TIP switch to the center
position.