Specifications

PROGRAMMING
To program a System Answer button on a voice terminal:
HOW TO USE
NOTE: Only the attendant or the alternate attendant can have a
System Answer button. The voice terminal does not have to be at
Intercom # 10.
1 Label the button “System Answer.”
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch System Answer.
4 Dial the three-digit code *58.
s Slide the TIP switch to the center position.
To activate the System Answer feature:
1 Touch System Answer.
Green light on = SA on
Green light off = SA of
Green light flashing = Problem with SA.
If the green SA light is flashing, report the problem to the system
administrator who should refer to Section 7, “Troubleshooting,” to correct the
problem.
System Featwe
NOTE: This feature is used with a MERLIN Plus system data collector
and an AT&T 475 printer or its equivalent.
DESCRIPTION
If the system administrator needs to verify the features administered to the
system or needs a written copy of the lines and features on each voice
terminal, he or she can use the data collector and the printer to print a
, System Feature Report. This report lists both systemwide features and
programmed features and lines on individual voice terminals.
The system features that can be printed on the System Feature Report are:
l Disallowed List assignments for each voice terminal.
l Allowed List assignments for each voice terminal
l Transfer Return Interval
l Call Report settings, such as the minimum call duration of a call for which
the CalI Report feature will print information
5-108 MERLIN Plus Svstem Features