Specifications

4 Touch Administer.
5 Leave administration mode by sliding the T/P switch to the center
position.
Number of Rings
To change the number of rings (the default is two rings) before SA answers a
call:
1 Slide the T/P switch to P and touch Administer.
2 Dial *764 plus the number of rings (between 0 and 9) before the SA
feature picks up the call.
NOTE: If the number of rings is set to 0, the voice terminal will not ring,
and the calls will be immediately answered by SA.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
BWp-y
Voice Message
To select a message to be played to the caller for lines answered by SA:
1 Enter administration mode by sliding TIP to P and touching Administer.
2 Dial *77-followed by the option desired. (Message 2 is the default):
0
= No voice message; call is immediately placed on hold
1
= Message says, “Please hold. ”
2
= Message says, “Please hold, your call will be handled momentarily. ”
NOTE: If a line number is administered using *50, this message precedes
message 1 and 2: “You have reached . , .’ where . . . is a number entered
by the system administrator in “Call Forwarding.”
3 Touch Administer.
The console beeps twice.
4 Leave adminisb
position.
T l P
M
ration mode by sliding the TIP switch to tl hl e center
MERLIN Plus System Features 5-l 07